22 LR Rifle Cleaning Kit with Cable

1. Run the full 36 inches. The braided steel pull-through cable, with brass knurled ends and a weighted pull, clears a rifle barrel end to end in one pass — no rod, no bench, no fuss.

2. Match the bore. The .22 bore brush (copper-bronze wire) and the .22 cotton mop are sized for .22 LR rifle barrels, and the brass patch puller seats patches exactly where you want them.

3. Take care of the rest. Double-ended nylon brush, 6-piece screwdriver bit set (PH1, PH2, slotted 4 & 7, Torx T15 & T20), and the brass connector for the screwdriver handle — bolt, action, and screws covered.

4. Keep it together. The olive molded plastic case with transparent lid, hanging hole, and slide latches — every piece visible and accounted for, from the range bag to the gun room.

5. Buy from the maker. Our own Ningbo brush factory, 20+ years in the industry (est. 2000) and OEM partner to established US brands — dependable quality, wholesale-friendly supply.

22 LR Rifle Cleaning Kit with 36-Inch Pull-Through Cable

Everything You Need to Clean Your 22 LR Rifle in One Case

Few firearms get shot as often as a .22 LR — and cleaned as rarely, because the full rod-and-jag ritual feels like too much for a rimfire. This 22 LR rifle cleaning kit bundles a 36-inch pull-through cable, .22 bore brush, mop, brass patch puller and 25 cleaning patches into a compact case that fits a range bag or gun safe — plus a 6-piece screwdriver bit set and a double-ended nylon brush for the rest of the rifle. For a training rifle or a match target rifle, that is the whole maintenance routine in one olive case.

36-Inch Pull-Through Cable for Long Barrels

The 36-inch pull-through cable with black T-handle reaches through standard .22 LR rifle barrels without a rigid rod, making field and range cleaning fast and simple. The cable is braided steel wrapped in a transparent protective sleeve, with brass knurled connectors at both ends and a weighted pull for a smooth, straight draw from chamber to muzzle — it fits rifles with barrels up to about 26 inches, including the 36-inch overall with handle margin.

Fig.5 — Alt: 36-inch pull-through cable with brass patch puller threaded with cleaning patch

.22 Cal Bore Brush and Mop

The .22 caliber bore brush (copper-bronze wire) and cotton mop are sized for rimfire barrels, lifting powder fouling from bore and chamber without scoring the rifling.

Caliber note: this kit is sized for .22 Long Rifle (0.22 in bore) rifle barrels — the most common rimfire cartridge in the US, from training rifles like the Ruger 10/22 to match rifles like the CZ 457 and Savage Mark II. The bore brush, cotton mop, and brass patch puller are all .22, and the 36-inch cable is long enough for a full-length pass through any standard rifle barrel. If you are not sure your barrel is .22 LR, measure the bore or send us your model before ordering — we will confirm compatibility.

Brass Patch Puller, Connector and 25 Patches

The brass patch puller holds standard 1.5 x 3 inch patches for a final dry pass, and the brass connector for the screwdriver handle is included with the set. The 6-piece screwdriver bit set (PH1, PH2, slotted 4 & 7, Torx T15 & T20) covers common rifle hardware — stock and action screws, sight screws, and scope-mount fasteners — for hand-tight maintenance, not for heavy torque.

Here is exactly what this 22 LR rifle cleaning kit ships with:

• 1 × Double-ended cleaning nylon brush (large + small heads)

• 1 × Black T-handle (with brass swivel)

• 1 × Bore brush, .22 cal (copper-bronze wire)

• 1 × Cotton mop, .22 cal

• 1 × Screwdriver bit set — 6 pcs (PH1, PH2, 4, 7, T15, T20)

• 1 × Brass patch puller, .22 cal

• 1 × Brass connector for the screwdriver handle

• 1 × 36 in (91 cm) braided steel pull-through cable (transparent sleeve, brass knurled ends, weighted pull)

• 25 × Cleaning patches, 1.5 x 3 in (white)

Fig.6 — Alt: Pull-through cable assembly with bore brush and mop for 22 LR rifle

How to Use the Pull-Through Cable

Range day: after the last range session, attach a patch to the cable and pull it through the bore once or twice — lead fouling and powder residue out in seconds, no rod or bench required.

Bench session: run the .22 bore brush with a bore cleaner, seat patches on the brass puller, then finish with the cotton mop and a light oil coat.

Match week: the 6-piece bit set (PH1, PH2, slotted 4 & 7, Torx T15 & T20) covers scope-mount and action screws, and the transparent case keeps this 22 LR rifle cleaning kit ready between stages.

Always confirm the firearm is unloaded and follow your owner's manual before cleaning.

Factory-Direct from a 20-Year US-Market OEM

The brushes in kits like this one have been made on our own floor since 2000 — a Ningbo plant opened in 2004, producing up to 600,000 brushes a month for brands including Remington®, Cabela's®, Bulldog®, and Birchwood Casey®. Huntimes builds on that same floor, shipping to the United States, the European Union, and Australia. We handle private-label branding, custom kit contents, and custom packaging — tell our sales team the quantity and specifications, and we will quote. For a dealer, that means a .22 kit with the capacity, the quality record, and the factory-direct terms behind it.

Frequently Asked Questions

Q1. Which rifles does this kit fit?

A1. This kit is built for .22 LR rifle barrels — the bore brush, cotton mop, and brass patch puller are all sized for .22, and the 36-inch cable clears the full length of a standard rifle barrel (fits barrels up to about 26 inches, including the 36-inch overall with handle margin). If you are not sure your barrel is .22 LR, measure the bore or send us your model before ordering — we will confirm compatibility.

Q2. Are the brass, bronze, and steel parts safe for my barrel?

A2. Yes. Brass and bronze are softer than barrel steel, so normal cleaning will not scratch the rifling. The cable is sheathed and pulls straight through the bore, and the cotton mop applies oil without abrasion. Unload the firearm first, follow the owner's manual, and use a bore cleaner before brushing.

Q3. What are the screwdriver bits for?

A3. The six bits cover common rifle hardware: PH1 and PH2 Phillips bits for stock and action screws, slotted bits 4 and 7 for flat-head screws on sights, and T15 and T20 Torx bits for scope-mount fasteners. The brass connector for the screwdriver handle is included with the set. Use the matching bit by hand — these bits are not meant for heavy torque.

Q4. Do you offer OEM/ODM and private-label options?

A4. Yes. Since 2000 we have made cleaning kits and brushes for established US brands in our own Ningbo factory (est. 2004; 8 acres; up to 600,000 brushes a month). Private label, custom kit contents, and custom packaging are all available — send your quantity and specs, and we will quote.

Q5. How is the kit packaged, and what are wholesale terms?

A5. Each kit ships in its storage case with every component secured inside. Wholesale orders can be packed in retail-ready boxes, display cartons, or bulk master cartons. MOQ and lead time depend on order size and customization — contact our sales team; we ship to the US, EU, and Australia.

Fig.1 — Alt: 22 LR rifle cleaning kit in storage case, lid open

Fig.3 — Alt: 22 LR rifle cleaning kit with pull-through cable and black T-handle, 3/4 view

Fig.2 — Alt: 22 LR rifle cleaning kit contents arranged in case with bore brush and cable

Fig.4 — Alt: 22 LR rifle cleaning kit accessories flat lay with patches and screwdriver set

Fig.7 — Alt: .22 caliber bore brush and mop set for 22 LR rifle cleaning kit